Traffic Sign Pole and Road Safety Sign Pole hot Dip Galvanized Pole

Installation
The octagonal galvanized Road Traffic Sign Pole can be installed in two ways: direct burial and concrete foundation:
1. Direct Burial: For this method, the pole is driven directly into the ground through the use of augers. The holes are dug to a minimum of 1/3 of the pole's length. After being driven into the ground, the pole is then anchored with concrete.
2. Concrete Foundation: For this method, a hole is dug that is at least twice the diameter of the pole and is usually about 3-4 feet deep. The pole is placed in the hole, and then concrete is poured around the pole to hold it in place.