High Mast Light With Lifting System

The lifting system of a high mast light with lifting system is designed to allow easy maintenance and repair of the light fixtures at the top of the mast. This system enables the workers to lower the light fixtures so that they can make the necessary repairs or maintenance without requiring specialized equipment or climbing the pole.

There are two types of lifting systems that are commonly used in high mast lights: manual and motorized. The manual lifting system is often a simple winch mechanism that is operated by turning a handle or pulling a lever. The winch is attached to a cable that runs up the pole and is attached to the light fixtures at the top. When the handle or lever is turned or pulled, the light fixtures are lowered down to the ground level for maintenance or repair.

The motorized lifting system is a more advanced system that uses an electric motor to raise and lower the light fixtures. This type of system requires less physical effort, and workers can easily adjust the height of the light fixtures by simply pressing a button or turning a switch. The motorized lifting system is more expensive than the manual system, but it is much easier to use and is often preferred by large organizations that have several high mast lights to maintain.

Configuration of high pole lamp:

1. The shape is usually a dodecagonal or octagonal conical lamp pole, which is made of high-strength steel plates cut, bent and automatically welded. Generally, the heights are 25m, 30m and 35, and the maximum wind-resistant design can reach 60 meters per second.

2. In terms of functional frames, decorative materials are also mainly made of steel, and steel pipes, lamp poles and lamp discs are treated with hot-dip galvanization.

3. The electric lifting system consists of an electric motor, a winch, three sets of hot-dip galvanized steel wire ropes, cables, etc. The lamp pole is installed internally, and the lifting speed is 3-5 meters per minute.

4. The guide and unloading system consists of a guide wheel and a guide arm to ensure that the light disc does not move horizontally. During the lifting process. When the light tray is in place, the light disc will automatically fall and be locked by the hook.

5. The lighting electrical system is equipped with 6 to 24 lamps, 400W, 1000W, gold halogen lamps (white light), spotlights and floodlights. The computer time controller can automatically control the switching time, partially or fully lit.

6. Lightning protection system: The top of the lamp is equipped with a 1.5-meter-long lightning rod.

The underground foundation is equipped with a 1-meter-long grounding line and welded with underground bolts.